Consider the fact that finishing drywall can be difficult if you are considering a remodel of your home or workplace. Experience is always the best teacher. However, having a little knowledge before you start can save you time and money. It is important to determine the right type and thickness for your particular situation. The green board, also known as drywall, is best for installing drywall where dampness and water are a concern. This type of drywall is often used for surrounds to showers and bathtubs. If moister is not an issue then the next question to ask would be: What thickness of drywall will work best for you? Thicker sheets of drywall (such as 3/4 inch) are often used for insulation, stability and security. For most interior uses, 1/4 to 1/2 inch dry wall suffices. You can see drywall companies for more information.

Next is cutting the drywall to size. You should remember that the studs in residential and commercial construction will be 16 inches across. A 4 x 8 foot sheet of drywall should be measured to the center, and not the edge. Because you will be installing another sheet, you should measure to the center of the stud. For the sheets to be secure, they must meet in the middle. After you have measured the board, use a knife to cut it on the side that faces outward. It is not necessary that you cut through all the drywall. This can cause the boards to break apart or crumble prematurely. The sheet will begin to snap when pressure is applied after it has been scored. People with less experience may find it easier to lay the edge of the score on a flat surface.